You can easily get thes pocket lids off without disassembling the door. Actually disassembling the door wouldn't buy you anything. Look at the hunges of the pocket lid. Use a small nail punch or even a thick paper clip and push the little hinge rods through. Then you just have to unhook the spring latch. Easy peezy.
Take your peeling door pocket lids and pop them in the dish washer and wash them on hot without drying. Run it for about five or ten minutes with hot water and this will start to break down the rubber coating that's peeling off. Pull them out while still hot and you can rub that stuff right off with a little elbow grease
I painted mine and they still look great. Got the paint from expresspaint.com. You can type in your year and model or color code (which you can get on the inside of the front hood) They can give you your color match in spray cans. Get two cans of that so you have extra, a can of primer, tack cloth, and clear coat. Be patient.
__________________
TimAustinW
http://i226.photobucket.com/albums/d...ignature-1.jpg
02 Seal Grey, NHP Headers w/ Highflow Cats/2ndary Bypass Pipes, smoked side markers/3rd brake light, exterior match interior trim, 986 Lloyds Mats, 986 deck lid emblem, arctic silver intake grills, ipod link, painted calipers, Glass Window Robbins Top with defroster kit, Bose Sound System, Leather lower door panels, Console Lid w embroidered crest; Stainless door sills; Painted Bumperettes; Custom Hood Crest
Threaded Mode
