Newly installed short shifter and knob

[blinkwatt]

Originally Posted by blueillusion97

I recently installed the same new design shifter...After reading numerous comments that its not reversible i just didn't believe it and got it anyway....sure enough it is reversible...Newer shifter does not have nuts on both sides of the shaft like the previous one, instead is has threads in the housing it self and one nut on the other side...so what you need to do it undo the nut so that the tread is showing of the bolt then grab the bolt just hard enough not to shave off the thread and twist it and it will unscrew...then the bolt just simply comes out, reverse the shaft, screw the bolt back in, screw the nut back on and you are done...

Just to make it clear you bought your shifter recently from a2rinc correct?

[blueillusion97]

No, but the one i got is 100% identical to the ones he sells...there are numerous sellers that sell the same shoftshifter kit and they receive it from the same manufacturer......also let me correct my self then i sed there is nut only on one side i made a mistake if i remember correct there are nuts on both sides but if you unscrew then the bolt still does not come out, thats when you need to screw it out with pliers...and if i remember correct you need to unscrew it from the sides where on the bolt right next to a housing there in small part without treads. It unscrews quite easy without any stugle........i really need to start taking pictures on all the work i do

[kbrandsma]

I got mine from:

turboracerx@adelphia.net

for $49 + $12 shipping

eBay site

[ktee]

Is this exactly the same as the B&M?

[blueillusion97]

Originally Posted by ktee

Is this exactly the same as the B&M?

yes its exactly the same as B&M once you turn the lever around.....the only difference is the price

[blueillusion97]

Originally Posted by kbrandsma

I got mine from:

turboracerx@adelphia.net

for $49 + $12 shipping

eBay site

I got mine same place