Brake Fluid

[Tool Pants]

Well, I did figure out a way to bleed a caliper twice as fast....

[DaveE]

Originally Posted by Tool Pants

Well, I did figure out a way to bleed a caliper twice as fast....

Ha Ha!! That's an awesome set-up!

[JoshMD]

What's the best brake fluid to use? ATE Blue?

[Adam]

Originally Posted by JoshMD

What's the best brake fluid to use? ATE Blue?

ATE blue is what I used and I'm very happy. I think they also offer an ATE gold so that way you can alternate colors. This way you know when the old stuff is flushed out.

[Tool Pants]

For a normal brake fluid change you do not need a PST2 if you have traction control or PSM. You do need it however if you are changing the fluid because those components have been replaced.

The manuals also say you need to hold down the clutch pedal when bleeding the clutch. You don't need to do this unless you have just replaced the master cylinder.

Originally Posted by Tool Pants

For a normal brake fluid change you do not need a PST2 if you have traction control or PSM. You do need it however if you are changing the fluid because those components have been replaced.

The manuals also say you need to hold down the clutch pedal when bleeding the clutch. You don't need to do this unless you have just replaced the master cylinder.

Tool Pants, does this hold true for the 987 too? I thought you needed the PST2 for the 987 Boxster.

[Tool Pants]

PIWIS is the replacement for the PST2 and is needed for the 2005 up cars.

I am not up on the 987/997. I did speak to Peter once about bleeding the brakes on the newer cars and he said he did use the PIWIS. I do not remember the details as it will be a while before the newer cars show up at our work on cars days. Peter said it was a 997 but it might have had PASM or something like that.

Originally Posted by Tool Pants

For a normal brake fluid change you do not need a PST2 if you have traction control or PSM. You do need it however if you are changing the fluid because those components have been replaced.

The manuals also say you need to hold down the clutch pedal when bleeding the clutch. You don't need to do this unless you have just replaced the master cylinder.

Can you elaborate on how you do bleed the clutch then TP? I am doing this soon and need all assistence.

Originally Posted by xusmnimij

Can you elaborate on how you do bleed the clutch then TP? I am doing this soon and need all assistence.

Tony, a little OT here, but on the 987 the brake fluid and the clutch fluid are a shared system, so both get done at the same time. Not sure about the 986 Boxster.

I just had mine done last month. The dealership charged about $150.

[FTD]

Originally Posted by Tool Pants

For a normal brake fluid change you do not need a PST2 if you have traction control or PSM. You do need it however if you are changing the fluid because those components have been replaced.
.

I did my research on this particular relationship and found similar statements. Unless one is also replacing master cylinder or other major component thank you for your confirmation. I am back to saving $150.00!

Originally Posted by FTD

I did my research on this particular relationship and found similar statements. Unless one is also replacing master cylinder or other major component thank you for your confirmation. I am back to saving $150.00!

FTD, of course you will save $150 minus the true value of your time, therefore somewhat significantly less than $150! Satisfaction for sure. I understand that.

I only say this because people usually forget the value of their time when doing DIY projects.