Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Reply
 
LinkBack Thread Tools Display Modes
Old 08-06-2007, 08:24 PM   #1
Registered User
 
Join Date: Jul 2006
Location: New York
Posts: 17
Door speakers

Hi:
the speakers on the door sounds bad now, I didn't open it and check yet.
is there any one knows about this?
what's the size of speakers in there? woofer only or two-way?
with AMP or without AMP ?

my car comes with the factory AMP in the front, so, should I put a big watts speaker in it?

Please let me know

Thank you
hangout is offline   Reply With Quote
Old 08-07-2007, 04:46 AM   #2
Registered User
 
Join Date: Nov 2006
Location: In the garage...
Posts: 1,546
to answer your questions:
they are woofers only - 5.25" and the cross-over to send them only low freq is built into the amp. In my '99, I had 2ohm speakers in the door but 4 ohm in the dash (I think some later MY might have 4 ohm all around).

Factory amp (in M490 option package) is only 40W per channel so you can put "big watt" speakers in if you like, but you need to make sure the RMS low end rating is in the neighborhood 2-4W and the top line is at least 40W. Otherwise, you won't give them enough power to make them sound good/right.

Another important aspect is the freq rating of replacement speakers - you want something rated 50Hz or below. I don't know the cross-over point but anything higher is basically mid-range and the speakers won't get the signal they need. The crux of the problem is finding 5.25" speakers that meet the RMS and freq requirements that can be plug n play w/ the factory tuned port enclosure. 5.25" - especially at lower power ratings, really don't go below 55Hz or so. When changing out mine, I tried 3 different sets of good quality 5.25" speakers to swap in and 2 sounded worse than stock, the other was only as good as. So I ended up pulling out the tuned port and putting in 6.75" Infinity Kappas.

This is much easier than it sounds, but what you might want to do is build custom baffles and mount either 6.5" or 6.75" two ways (only wiring up the woofer, though) to replace the tuned port enclosure and the stock 5.25" speakers. I did on mine and the sound is exceptionally good - but it all looks stock and uses the stock amp.

Here are 2 links:
How to Modify the Boxster's Sound System by Andy M on RennTech
Template for Custom Baffles

you don't have to use the template I created in the second link but it might help. Otherwise, Andy's directions are spot on and each of the projects (dash, rears, doors) will take an evening (about 3 hrs) to complete - start to finish.

Good luck and make sure if you are going to keep the stock amp you find speakers that will maximize it's power - RMS, peak, sensitivity (91dB +) and freq. Take a look at Crutchfield for more information on ratings, etc. if you're not familiar. You can find prices better than them but they do have some good educational articles to help you understand speakers better.
Burg Boxster is offline   Reply With Quote
Old 08-07-2007, 07:50 PM   #3
Registered User
 
Join Date: Jul 2006
Location: New York
Posts: 17
HI:
Thanks for you information. I just checked Ebay, most of the 5.25 inch speakers are two way, I don't think it should be a problem, Right?
and what's the depth of the speaker should be?
I saw a Alpine on Ebay, sps-13c. any one tried it before?
please let me know
hangout is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 06:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page