Pic of H&R Springs installed

[conradtan]

Ok I have to ask, how much, out the door, installed... looks great! I want to do this someday, soon.

[Bisimoto]

Looks good!

[thenavarro]

Originally Posted by conradtan

Ok I have to ask, how much, out the door, installed... looks great! I want to do this someday, soon.

I got the Springs on ebay for around $250.00 delivered, installation of the springs was $358.00, and a 4 wheel alignment (necessary after installation of the springs) was $185.00.

Take care,

Mike

[SC986]

Looks really good Mike, any concern on clearance with bumps, potholes?

Off topic but can you explain the wheel spacers? I've read people using them but not up to speed as to why you want/need them. I am considering your same wheels.

[thenavarro]

Originally Posted by SC986

Looks really good Mike, any concern on clearance with bumps, potholes?

Off topic but can you explain the wheel spacers? I've read people using them but not up to speed as to why you want/need them. I am considering your same wheels.

I don't think bumps like speedbumps will have too much of a negative impact because you know they are coming and you will go slower over them. It will make me more alert to watch out for that stuff. The thing that's causing me the most concern right now is pulling into the same parking spaces I've always used and in the pre-H&R spring days, my front bumper would go up over the sidewalks or curbing in front, now it will hit so I have to park a little bit further back then I'm used to.

The wheel spacers can be both used aesthetically and necessary depending on the wheel you run. Aesthetically, they will push your wheels further out from the car and I think that looks better as it gives the appearance of filling up the wheel wells better. By necessary, my aftermarket Carrera lightweights have a different offset than stock Boxster wheels, so in order to get them pushed out far enough that the wheel doesn't hit a strut or anything else, I had to use spacers. 18 mm spacers would have done the trick, but I opted for the 21 mm to give it a wider appearance.

Take care,

Mike

[jwilson95]

Navarro-

Looks good sitting still, but I'd also be concerned about transitions over driveways/pulling into gas stations, etc about scraping.

I'd be interested to see how you feel the handling has changed. I've always been a little disappointed about the understeer that Porsche engineered into the car. I didn't buy a mid-engined car to handle like a Honda Civic.

I think I'd go for the ROW M030 so you get the Stuttgart engineering and the extra suspension bits.

Let us know if it is more neutral or more oversteer at the limit now.

Jeff

[SC986]

Thanks Mike! I guess no safety or durability issues with the spacers? Do you have any rubbing issues at full turn?

I had not thought about curbs and such when parking. As beat up as my bumper is I wondered if the previous owner had lowered mine

[thenavarro]

Originally Posted by SC986

Thanks Mike! I guess no safety or durability issues with the spacers? Do you have any rubbing issues at full turn?

I had not thought about curbs and such when parking. As beat up as my bumper is I wondered if the previous owner had lowered mine

SC986,

Porsche has a tech bulletin on spacers I believe which contains recommended spacer size for model years, but I do not have the tech bulletin. Maybe someone will post if for you, or if you become a contributing member of renntech.org then you will have access to it.

The wheel spacers do require longer lug bolts. Under regular street driving so far, I have not experienced any rubbing issues at full turn. I haven't yet had the opportunity to take it back to the track to see if I have any issues there under a full load.

Take care,

Mike

[thenavarro]

Originally Posted by jwilson95

Navarro-

Looks good sitting still, but I'd also be concerned about transitions over driveways/pulling into gas stations, etc about scraping.

I'd be interested to see how you feel the handling has changed. I've always been a little disappointed about the understeer that Porsche engineered into the car. I didn't buy a mid-engined car to handle like a Honda Civic.

I think I'd go for the ROW M030 so you get the Stuttgart engineering and the extra suspension bits.

Let us know if it is more neutral or more oversteer at the limit now.

Jeff

Hi Jeff,

I have not yet had the opportunity to take it to the track to test it at its limits. Just driving around the highway and streets, the steering seems to be more responsive, IE, it doesn't seem like you have to work as hard to turn in the curves, and it feels more stable and planted around the curves. I'm not an engineer, so I just state what if feels in the seat of my pants, much more important than a data sheet anyway. Hopefully in the next couple of weeks, I'll get a chance to take her out to Motorsport Ranch and see if I can feel a difference there. The Boxster was always a great handling car to begin with.

I know what you mean about the ROW M030, but I decided I wanted my car lower than it offered. However, I did call sunset to order the ROW M030 as I was going to use the H&R Springs and combine it with the other suspension components of the ROW M030, and they did not have any of them in stock so I just decided that was the sign to just do the springs and to save a little money (at least in the short term) for other mods such as painting my hardtop Seal Grey instead of Black Metallic.

I'll let you know how it handles once I get out to Motorsport Ranch. Take care,

Mike

[m332is]

Originally Posted by SC986

Looks really good Mike, any concern on clearance with bumps, potholes?

I've been running the H&R springs with stock shocks on my 2001 S for about 20-25K miles over the past 4-5 years. During that time, I have had zero issues with handling, clearance or potholes. I love the way the car looks and drives. At some point, I will need to replace the shocks and I was thinking about the Blistein Sports.