I have good rods from a couple cars, but the rubber bushings should be replaced. Bushings are available from Pelican for about $5 each. https://www.pelicanparts.com/More_Info/98656188100.htm?pn=986-561-881-00-M1253&SVSVSI=1047&fs=0
Tomorrow I'll dig out a box of Top Parts and select a pair/figure out a price.

The husk of the car is gone now.
https://live.staticflickr.com/65535/...9d4f3cb8_c.jpg

I have replied to the messages that I've received. Much of the wiring harness is available if anyone needs a few connectors. I have the stripped down seat frames (no leather or padding) in case anyone can use a seat base or parts. Lots of nuts, bolts, hardware and assorted black interior trim pieces.

Pics, brake light "top black piece" and as-is brake light for 'junglegreen':
https://live.staticflickr.com/65535/...8d4b250e_c.jpg
https://live.staticflickr.com/65535/...545ba5be_c.jpg

Thanks Jon for the 3rd tail light cover. I appreciate the quick shipment and the more than reasonable price. The 2000 Boxster is whole again!

Jon, thank you for the 3-pin connector, even with a copy of the wiring diagram, very much appreciated!

Any chance do you have a pair of rear bearing carriers? I kind of messed up my project and would rather swap out my base ones than machine them to fit the S axles

I prefer not shipping big and heavy things outside the USA. Lets see if Josh/Darkstar has a pair for you. If not, I'll see what i can do.

Okay, I have a US forwarding address if he cannot help.

If you're still looking for the carriers, I'm willing to send mine to your US address. I'll clean them up, get some pics, and figure out shipping.

Payment received and shipping Monday. I'm having trouble getting the 'track rods' off. I'm going to let them sit with penetrating oil for a day and try again. If they don't come off for me, they are included at no extra cost (and ruined from trying to remove). The brake cables will be included and usable, but damaged (typical) as seen in the picture.

https://live.staticflickr.com/65535/...0896b209_b.jpg

https://live.staticflickr.com/65535/...a5b2737c_b.jpg

https://live.staticflickr.com/65535/...06542158_c.jpg

I'm cleaning up some of the mess of leftovers. Prices include shipping. Shipping to US addresses only. Here are some specific items:

Headlight washers; good function, but some small cracks as pictured. $60 ea or $110 both.
https://live.staticflickr.com/65535/...dbfe8a8a_b.jpg
https://live.staticflickr.com/65535/...9d641378_c.jpg
https://live.staticflickr.com/65535/...ff0c0df5_c.jpg

Sun visors with mirror cover. $75 ea or $120 both. The ugly label can easily be removed: http://986forum.com/forums/diy-project-guides/67677-how-remove-airbag-warning-decals-us-spec-vanity-mirror-covers.html
https://live.staticflickr.com/65535/...70b49e52_c.jpg
https://live.staticflickr.com/65535/...e937e4d4_c.jpg

Drip pan for right side of top. This one looks good. I have a pair that I will remove from a parts car next week, but I am unsure of the condition. $50
https://live.staticflickr.com/65535/...08900807_c.jpg
https://live.staticflickr.com/65535/...e4ef1e55_c.jpg

Continued, more stuff. Make me an offer on any or all of this. I don't need a lot of money. Shipping most likely in a USPS medium flat rate box ($16.25) except for the rollbar padding which is too big.

Speaker housings - speakers are junk. Leather rollbar padding - minor scuffs. Door handle spring. Under-dash pocket, OBD2 connector, seat belt receptacle.
https://live.staticflickr.com/65535/...176169a9_c.jpg
https://live.staticflickr.com/65535/...cff0d3c3_c.jpg
https://live.staticflickr.com/65535/...17255b2b_c.jpg
https://live.staticflickr.com/65535/...0271a74f_c.jpg
https://live.staticflickr.com/65535/...0ecec306_c.jpg

Any chance you have the left mirror trim where the mirror control switch is?

So far I haven't found one, but I probably have one buried deep in a box somewhere. I was going to say it can't cost much to buy new, then saw $54.75 at Pelican. :eek:
Part numbers are (with variations) Left 996.555.651.00 996.555.651.01 and Right 996.555.652.00 996.555.652.01

I would love to ditch the four tamper resistant lug nuts with plain ones on my rims.

$20 shipped sound good?
http://986forum.com/forums/uploads02...1635990062.jpg

Jon - if you have four more, I’d like a set as well.

Bill

I can do that. I may not have time to ship them until Monday, but definitely by then.
I have a PayPal link for easy payments: paypal.me/JonCarparts
You can use that for $20, make sure you include your Forum name (if different) and shipping address in comments. Thanks.

Done! Thanks

That was quick. Payment rcvd. Thanks!