Parting out a whole lot of Boxsters - Page 64 - 986 Forum - The Community for Porsche Boxster & Cayman Owners

Boxtar · 07-12-2018, 08:41 PM

Hi Woody,
Need a left-side wind deflector mesh insert thing. Mine decided to leap out at speed and smash itself the other day. Shipped to 97215?
Thanks, Andrew.

Okanebm · 07-16-2018, 08:10 AM

Woody, need the fuel line for a 2001 3.2 that connects at the fuel rail. Thanks in advance!

itsnotanova · 07-17-2018, 10:34 AM

Quote:

Originally Posted by Okanebm

Woody, need the fuel line for a 2001 3.2 that connects at the fuel rail. Thanks in advance!

As far as I remember The fuel line for 2001-04 is basically two parts. One goes from the tank to the back of the firewall in the engine bay. From there it's one piece all the way to the injectors. I'm not interested in removing and shipping the long fuel line from the front to the back. As I remember the whole front suspension and fuel tank has to come out to remove it. As for the second section, I have one off a 2002 or 2003 and I believe they're the same as a 2001. The hoses that connect the fuel rails is not transferable. You're better off going to your local autoparts store and getting brand new fuel hoses if that's what you're looking for. I personally would get braided fuel hoses if I were going through the effort

Okanebm · 07-18-2018, 06:05 AM

Appreciate the response and the thoughts, and it looks like i'll eventually be going that route. It would be the piece from the firewall into the engine bay. After a Looonngggg time away from the Boxster(back2back deployments), I pulled the engine and planted a groomed donor engine. Everything was pretty straight forward until I attached the fuel line to the rail, first start, everything ran great, 2nd start, leaking fuel everywhere. Ended up being a crack at the plastic right where it meets the base of the cone nipple fitting. My initial thought was staying as OEM as possible, but after a trip to the store for fuel hose, connection fittings(you get the idea)..... eventually i'm going to get this to work.

Lew · 08-15-2018, 12:04 PM

I am looking for a wheel cap with the gold crest? Mainly just need the emblem.

maytag · 08-15-2018, 12:50 PM

Woody, I'm looking for the black plastic part that goes right in front of the right rear wheel, at the rocker panel, on an '03 S. (Not sure if other models are the same?)

It's the corner-flare looking piece.

You got one?

Sent from my SM-G930T using Tapatalk

JohnAtlas · 08-16-2018, 10:32 AM

Hi Woody - I'm looking for left and right headlight mounting plates (996-631-041-00, 996-631-042-00) for an '04, shipped to your favorite little town in southcentral PA.

Thanks!

TPRJIMMI · 08-17-2018, 07:08 AM

Do you have a passenger side side cover? Rubber deflector in front of rear wheel. TIA

itsnotanova · 08-19-2018, 04:11 AM

Sorry guys I've been gone all week taking care of my sick mom. She had stage four cancer and beat it once but it has come back. It's always best to text me at 512-925-9171

Quote:

Originally Posted by Lew

I am looking for a wheel cap with the gold crest? Mainly just need the emblem.

Lew, you're better off buying new ones off ebay.

Quote:

Originally Posted by maytag

Woody, I'm looking for the black plastic part that goes right in front of the right rear wheel, at the rocker panel, on an '03 S. (Not sure if other models are the same?)

It's the corner-flare looking piece.

You got one?

Sent from my SM-G930T using Tapatalk

Returned your PM

Quote:

Originally Posted by JohnAtlas

Hi Woody - I'm looking for left and right headlight mounting plates (996-631-041-00, 996-631-042-00) for an '04, shipped to your favorite little town in southcentral PA.

Thanks!

Hi, I sell those for $40 each. but that's odd you need both. Did something happen?

Quote:

Originally Posted by TPRJIMMI

Do you have a passenger side side cover? Rubber deflector in front of rear wheel. TIA

I don't as for some reason they always seem to be beat up or missing the rubber piece on the bottom. You'll probably have to buy that new.
Thanks Woody

maytag · 08-19-2018, 05:03 AM

So, so sorry to hear about your mother woody.

Sent from my SM-G930T using Tapatalk

Lew · 08-19-2018, 07:16 AM

Woody says, Lew, you're better off buying new ones off Ebay.

Thanks Woody, I did look on Ebay earlier, and elsewhere, but finally went to Amazon and found the new concave wheels caps for less money than what was listed on Ebay, etc. Amazon listed the new wheel caps for 47 bucks each. With $38 in point credits for using my Amazon Awards charge card. I decided to purchase one for $9 and change. Since one of my Emblems was not looking so good, I decided on two new caps for $57 with free shipping. What a deal! The Dealership wanted 64 bucks each, and was told they keep a well stocked inventory because the Emblems fall off. My advise is to check your wheel cap Emblems. I found the other three on my car were loosely fit.

dlud · 08-23-2018, 03:54 PM

Looking for a turn signal socket for a 2002 base with halogen headlights.

Thanks.

itsnotanova · 08-23-2018, 05:08 PM

Quote:

Originally Posted by dlud

Looking for a turn signal socket for a 2002 base with halogen headlights.

Thanks.

Are you looking because your wiring has had the plastic crack and break off? You're better off taping the wiring or soldering on new wires. Most of them are at that point right now. Thank the Germans with their biodegradable wiring idea.

dlud · 08-23-2018, 05:21 PM

Actually I rewired the headlight already thinking that the turn signal fault must be inside the headlight. Turned out it was is a bad socket. It's the white plastic piece that quarter turns into the bottom of the case and holds the turn signal bulb.

3liter914-6 · 08-24-2018, 07:32 PM

I think it's probably been covered here before, but what's the status of Becker radio buttons -- specifically for the CDR-210, is that something you sell? If so do you have one and how much?

Thanks!

itsnotanova · 08-25-2018, 04:10 AM

Quote:

Originally Posted by dlud

Actually I rewired the headlight already thinking that the turn signal fault must be inside the headlight. Turned out it was is a bad socket. It's the white plastic piece that quarter turns into the bottom of the case and holds the turn signal bulb.

I have a $20 shipped minimum if particlewave doesn't have one for free

Quote:

Originally Posted by 3liter914-6

I think it's probably been covered here before, but what's the status of Becker radio buttons -- specifically for the CDR-210, is that something you sell? If so do you have one and how much?

Thanks!

Hi, I sell the buttons for $50 and they come with an untested radio unit attached and no code. $100 if I have a code.

Gasrider17 · 08-25-2018, 10:22 AM

Hi, I own a 2000 Boxster S manual. I am looking for a few items.
Interior drivers door handle. The spring broke on mine and it causes the window to drop that 1/4" for the roof when parked and raining.
Center console flip up door for the storage unit.

Not sure if this is correct or not but my Immobilizer got wet ( see door handle) and completely fried and I have heard that I could swap out the immobilizer, ignition and key from another car and have it all work. Do you know if this is correct and would you have the parts?

itsnotanova · 08-25-2018, 11:01 PM

Quote:

Originally Posted by Gasrider17

Hi, I own a 2000 Boxster S manual. I am looking for a few items.
Interior drivers door handle. The spring broke on mine and it causes the window to drop that 1/4" for the roof when parked and raining.
Center console flip up door for the storage unit.

Not sure if this is correct or not but my Immobilizer got wet ( see door handle) and completely fried and I have heard that I could swap out the immobilizer, ignition and key from another car and have it all work. Do you know if this is correct and would you have the parts?

I have an immobilizer, dme and key set for the 2000-02 boxster. Please text me at 512-925-9171 and we can go over the details there. Thanks Woody