Parting out a whole lot of Boxsters

[itsnotanova]

Originally Posted by bockster75

Hey Woody, noobie here. Appears that the previous owner might've not gotten frunk latched properly and had what I can only imagine as 5 seconds of terror. Windshield has obviously been replaced judging by the poor job of fitting the molding trim and gas shock tops damaged. Anyway, hood I have is reworkable but dented at the windshield edge. Looking for a black bolt in and go replacement for an 01 shipped to Iowa.

Sorry but I don't ship large body parts. It's probably best that you call around your local junkyards and see if you can find one that way. You'll probably have to go to Chicago to find one as Iowa doesn't have much of a Porsche community.

Originally Posted by garym

Woody I'm hoping you can help me out... Last night I put my key in the door lock and turned it, the door unlocked but the key would not turn back to center or come out. So I spent my Sunday evening in the parking lot of Wal-Mart taking off my door panel and removing the lock assembly. When I got it out it pretty much fell apart.

Attachment 21120
Attachment 21121

I'm pretty sure I need everything but the tumbler to fix this and a doorlock itself as my actuator stopped working a while ago.

98 Boxster Base

Thanks in advance.

It's a common problem and I sell the pieces you need for $25 shipped. Text me at 512-925-9171 tomorrow.
Thanks Woody

[bockster75]

Thanks Woody and I understand. My son is stationed in San Antonio, maybe I'll have him swing by on one of his trips home. I'll PM you when his next trip gets planned to see what you may have.

[all986S]

Woody,

You wouldn't happen to have a front engine mount and bracket? I don't really care about the condition of the mount itself I just need the bracket to press out the old fitting and put in the new one. Part number is 987-375-023-05-M100. Thank you.

[itsnotanova]

Originally Posted by all986S

Woody,

You wouldn't happen to have a front engine mount and bracket? I don't really care about the condition of the mount itself I just need the bracket to press out the old fitting and put in the new one. Part number is 987-375-023-05-M100. Thank you.

I have one that came out of a 986 for $25 shipped.

[all986S]

Perfect, I'll PM you information

[mikesz]

Another satisfied customer!

[Aggromuffin]

Hey Woody, I'm looking for a stock suspension for my 01 S. Have anything available?

Sent from my SM-G950U using Tapatalk

[robdunham]

Looking for Headlight Gasket. The one I have has gotten brittle and falling off. I am sure there are not many good ones around, any suggestions? 1997 Boxster

[Hombre]

looking for interior light unit that sits by rear view my nclip is broken on one side

[all986S]

Hey Woody,
Would it be worth shipping a top?
Thanks!

[itsnotanova]

Sorry guys for not getting back with you sooner. I keep forgetting to look at this thread. It's always best to text me at 512-925-9171.

Originally Posted by Aggromuffin

Hey Woody, I'm looking for a stock suspension for my 01 S. Have anything available?

Sent from my SM-G950U using Tapatalk

I have a piece here or there but not a complete suspension off a low mile car.

Originally Posted by robdunham

Looking for Headlight Gasket. The one I have has gotten brittle and falling off. I am sure there are not many good ones around, any suggestions? 1997 Boxster

I think we talked on the phone but if that wasn't you, sorry i would only sell those with the headlights.

Originally Posted by Hombre

looking for interior light unit that sits by rear view my nclip is broken on one side

What year? 97-00 can be bought on pelicanparts new for $20

Originally Posted by all986S

Hey Woody,
Would it be worth shipping a top?
Thanks!

Normally not worth the shipping. Specially the plastic window. If you shop around you can get a new plastic window sewn in for $150. You will want to take the top off (takes 15 minutes), and take it to somewhere that repairs lots of boat upholstery. Also tell them it's off a mazda miata and not a Porsche.

[Brockmeister]

Hi Woody
I need the plastic triangle that houses the mirror adjuster. Driver side for a '99.

[amagalla]

Hey Woody,
Do you have the spoiler mechanism (the gears and motor...the entire part that bolts into the trunk)? I don't need the spoiler itself, just the lifting mechanism. for a 2003 boxster. Let me know.

Tony

[brianmch]

Hi Woody,
Have an 01 Box.

Do you have the long, eccentric arms that operate the convertible tops? Seal grey preferred but any color will do.

Also on my wish list are
two cup holders
rear windscreen
brake calipers

Thanks

[papasmurf]

Looking for the headlight switch (not the knob but the switch assembly behind the dash).

[itsnotanova]

Originally Posted by papasmurf

Looking for the headlight switch (not the knob but the switch assembly behind the dash).

I sell them for $50+shipping

[thomas986]

Woody would you happen to have a key for this lug lock?

[itsnotanova]

I have one but I need it for myself in case a car comes in without the key. It makes life easier having the key but you can remove them without a key using a 6 sided socket. I think you use a 24mm. It's been awhile since I've had to use a socket so that size might be off. The socket should be just a tad too small to fit over the bolt head. Hammer the socket onto the lug bolt and it should hold enough to remove the lug bolt. Before you completely get the bolt out, remove the socket by tapping at it from a few different angles. Once you have it off then you can chuck those "security bolts" as far as you can throw them. They're kind of pointless because they won't slow down a real wheel thief. I sell 4 clean rust free lug bolts for $20 shipped and $2.50 for any additional bolt.

[605chopshop]

happen to have the threaded union that connects the two hard lines together for the power steering pressure hose? under the car near the driver rear wheel.

[newdesides]

Hey Woody, sent you a pm. Thanks!