Parting out a whole lot of Boxsters

[itsnotanova]

Originally Posted by ericv

Woody do you have any rear bumper screws for a 986 01 S?

Hi,
I'm sure I have one and that's something I would throw in for free if you were ordering something more significant. Otherwise my minimum is $20 shipped.
Thanks Woody

[.Jack.]

Drivers door latch for an 03 base?

Also frunk latch?

[itsnotanova]

Originally Posted by .Jack.

Drivers door latch for an 03 base?

Also frunk latch?

I sell the door mechanism for $50 and the front latch for $20 plus shipping

[.Jack.]

Sounds good to me. Do you mind shipping them next day air?

Pm sent

[itsnotanova]

Originally Posted by .Jack.

Sounds good to me. Do you mind shipping them next day air?

Pm sent

Sure but that can be stupid expensive. Please text me at 512-925-9171 so I can send you pictures. Thx

[Jerry1847]

Hi,

looking for a few things if you have them, going in an 01 Boxster S...

Passenger door lock mechanism, window regulator, micro switches
Drivers window regulator and microswitches
Charcoal canister
6 speed shifter boot
oem SSK
clean black center console

shipped to 23220

Thanks!

[robdelorenzo]

Hi
I'm looking for 2 front lower control arms for an 02 Boxster Base Standard Suspension.
The lower the mileage and the better the condition, the better.
Shipped to 90717
thanks!

[itsnotanova]

Originally Posted by Jerry1847

Hi,

looking for a few things if you have them, going in an 01 Boxster S...

Passenger door lock mechanism, window regulator, micro switches. $50
Drivers window regulator and microswitches. $50 includes motor and regulator.
Charcoal canister. $20
6 speed shifter boot Sorry I don't have any right now
oem SSK Sorry I don't have any right now
clean black center console Sorry I don't have any right now and probably never will for a 2000-04 as that crappy soft touch paint scratches if you look at it wrong

shipped to 23220 I won't know shipping until I get it boxed up. thanks Woody

Thanks!

Originally Posted by robdelorenzo

Hi
I'm looking for 2 front lower control arms for an 02 Boxster Base Standard Suspension.
The lower the mileage and the better the condition, the better.
Shipped to 90717
thanks!

The lowest I have has 55K on them. $40+shipping for the pair. Unless you're in a bind, I wouldn't suggest buying them.

[robdelorenzo]

I'm a noob to Pcars.....should I only install new ones?

[bmsamson]

Looking for a pair in good shape, no repairs needed, for an 03 base. Los Angeles.

[itsnotanova]

Originally Posted by robdelorenzo

I'm a noob to Pcars.....should I only install new ones?

I would if I were you. I'd also suggest replacing the control arm links too.

Originally Posted by bmsamson

Looking for a pair in good shape, no repairs needed, for an 03 base. Los Angeles.

Sorry I don't have any

[bockster75]

Hey Woody, noobie here. Appears that the previous owner might've not gotten frunk latched properly and had what I can only imagine as 5 seconds of terror. Windshield has obviously been replaced judging by the poor job of fitting the molding trim and gas shock tops damaged. Anyway, hood I have is reworkable but dented at the windshield edge. Looking for a black bolt in and go replacement for an 01 shipped to Iowa.

[garym]

Woody I'm hoping you can help me out... Last night I put my key in the door lock and turned it, the door unlocked but the key would not turn back to center or come out. So I spent my Sunday evening in the parking lot of Wal-Mart taking off my door panel and removing the lock assembly. When I got it out it pretty much fell apart.




I'm pretty sure I need everything but the tumbler to fix this and a doorlock itself as my actuator stopped working a while ago.

98 Boxster Base

Thanks in advance.

[itsnotanova]

Originally Posted by bockster75

Hey Woody, noobie here. Appears that the previous owner might've not gotten frunk latched properly and had what I can only imagine as 5 seconds of terror. Windshield has obviously been replaced judging by the poor job of fitting the molding trim and gas shock tops damaged. Anyway, hood I have is reworkable but dented at the windshield edge. Looking for a black bolt in and go replacement for an 01 shipped to Iowa.

Sorry but I don't ship large body parts. It's probably best that you call around your local junkyards and see if you can find one that way. You'll probably have to go to Chicago to find one as Iowa doesn't have much of a Porsche community.

Originally Posted by garym

Woody I'm hoping you can help me out... Last night I put my key in the door lock and turned it, the door unlocked but the key would not turn back to center or come out. So I spent my Sunday evening in the parking lot of Wal-Mart taking off my door panel and removing the lock assembly. When I got it out it pretty much fell apart.

Attachment 21120
Attachment 21121

I'm pretty sure I need everything but the tumbler to fix this and a doorlock itself as my actuator stopped working a while ago.

98 Boxster Base

Thanks in advance.

It's a common problem and I sell the pieces you need for $25 shipped. Text me at 512-925-9171 tomorrow.
Thanks Woody

[bockster75]

Thanks Woody and I understand. My son is stationed in San Antonio, maybe I'll have him swing by on one of his trips home. I'll PM you when his next trip gets planned to see what you may have.

[all986S]

Woody,

You wouldn't happen to have a front engine mount and bracket? I don't really care about the condition of the mount itself I just need the bracket to press out the old fitting and put in the new one. Part number is 987-375-023-05-M100. Thank you.

[itsnotanova]

Originally Posted by all986S

Woody,

You wouldn't happen to have a front engine mount and bracket? I don't really care about the condition of the mount itself I just need the bracket to press out the old fitting and put in the new one. Part number is 987-375-023-05-M100. Thank you.

I have one that came out of a 986 for $25 shipped.

[all986S]

Perfect, I'll PM you information

[mikesz]

Another satisfied customer!

[Aggromuffin]

Hey Woody, I'm looking for a stock suspension for my 01 S. Have anything available?

Sent from my SM-G950U using Tapatalk