Parting out a whole lot of Boxsters

[itsnotanova]

irelandmoss, Here's pictures of the three style of wheels I have. I have more pics of every wheel if you want to see more.
1) I have 2 fronts with 75% tires and 1 back that has a bald tire. All three have a dull finish to them. $100 each. 17s
I just bought another car that has this same style and all 4 wheels look to be in good condition from the pictures. I'm picking it up tomorrow and I will know more then.

2)I have 4 fronts and two backs all with 80-90% tread. I'm selling these as a complete set of four ($600)or the front two for $100 each. 17s

3)I have these 18 inch turbo twist with 80-90% tread for $600.

4) I don't have a picture for them right now, but I also have two front chrome 17 inch turbo twist with 80-90% tread for $100 each. does not include the center caps for the chrome wheels. Those are $50 each and I think they're authentic Porsche chrome caps

[itsnotanova]

Here's the latest inventory as of 9-11-14
I just picked up a 99 with the tiptronic yesterday. It has the rare 25K libell-türkis-metallic 1997-1999 paint code. Unfortunately it has 164,000 on the odometer, but it did start right up and ran real good. I didn't run it that long because it's got a busted radiator. I plan on getting it on the lift soon to get a better look underneath.


I picked up this 2003 a couple months ago. I bought it in boxes and everything was mostly sold off by then. There's only a few interior pieces left.


Here's the latest pics of what I have




--------------------------------------------------------------------------------

[franko]

Do you have a hard top mounting kit, 2 each: spin locks and screws ?

[y03gray]

Do you have a 2.7 engine for a 2003 Boxster available? My IMS bearing decided to go this week with only 60,050 miles on the car.

[itsnotanova]

Originally Posted by franko

Do you have a hard top mounting kit, 2 each: spin locks and screws ?

I do. $30 shipped

Originally Posted by y03gray

Do you have a 2.7 engine for a 2003 Boxster available? My IMS bearing decided to go this week with only 60,050 miles on the car.

I don't right now but I might be getting a 3.2 soon.

[Top_Ramen]

have any passenger side sun visors with the vanity mirror cover still in tact?

[rfuerst911sc]

I could also use a drivers side black sunvisor with cover.

[mgfranz]

Looking for a good headlight switch for a 2001. Also looking for a set of seat wind deflectors if you have them. Black please.

[itsnotanova]

Originally Posted by JAAY

Glass window with good black top?

Sorry I don't

Originally Posted by mgfranz

Looking for a good headlight switch for a 2001. Also looking for a set of seat wind deflectors if you have them. Black please.

PM answered/sent

[P993C2S]

Need a front passenger brake caliper. Have one available?

[dlud]

Looking for a turn signal socket for a 2002 base with halogen headlights.

Thanks.

[itsnotanova]

Originally Posted by dlud

Looking for a turn signal socket for a 2002 base with halogen headlights.

Thanks.

Are you looking because your wiring has had the plastic crack and break off? You're better off taping the wiring or soldering on new wires. Most of them are at that point right now. Thank the Germans with their biodegradable wiring idea.

[dlud]

Actually I rewired the headlight already thinking that the turn signal fault must be inside the headlight. Turned out it was is a bad socket. It's the white plastic piece that quarter turns into the bottom of the case and holds the turn signal bulb.

[3liter914-6]

I think it's probably been covered here before, but what's the status of Becker radio buttons -- specifically for the CDR-210, is that something you sell? If so do you have one and how much?

Thanks!

[Top_Ramen]

is that just one seat or do you have the pair. pm with price, mainlt looking for the seat back inserts but could be interested in the seats. Thank you

[Goodbiketime]

I just need the lighter insert, I will take the wind diffuser roll bar inserts if the other guy doesn't. Let me know how much I need to send you, via PayPal?

[Jager]

I am looking for a joint rod (non-adjustable) for a 97 Boxster. It's part #17 in the attached picture. Do you have one available?
Thanks

[itsnotanova]

Originally Posted by all_mota

is that just one seat or do you have the pair. pm with price, mainlt looking for the seat back inserts but could be interested in the seats. Thank you

I have a pair of the black leather with the Porsche head crest for $275. The passenger side is in good condition but the drivers side has cracks in the leather on the upper side bolsters.
I'm not interested in parting out those seats but I think I might have back inserts from another black pair. I'll look tomorrow

The wind diffusers/deflectors are more than likely sold.

[Top_Ramen]

Originally Posted by itsnotanova

I have a pair of the black leather with the Porsche head crest for $275. The passenger side is in good condition but the drivers side has cracks in the leather on the upper side bolsters.
I'm not interested in parting out those seats but I think I might have back inserts from another black pair. I'll look tomorrow

The wind diffusers/deflectors are more than likely sold.

Any idea how much to ship the seats to chicago? but let me know as well about the inserts as well

[MytinyBoxster]

I need the rear passenger side mud guard. It's the black piece in front of the rear tire. How much for it shipped to zip 10312?

Thanks