986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post

dcporsche99 · 02-02-2007, 11:54 AM

Hi,

I recall when I was contemplating new rims and wheels last summer, from what I have read,...I don't recall if it was on this forum or PCA, but after 9.5, spacers are best to put on. This may be especially true if you have lowered your ride. I, too, didn't want spacers, but not for the reason that you described....anyway, I went w/ staggered rims (re: 8 X18 in the front and 9.5 X 18 for the rear). They haven't caused me any grief yet (knock on wood).

Intererstingly, the Bentley Service Manual 1997-2004, p. 44-1 states that the approved tire combinations for 18 inch wheels are:

Front 7.5 X 18 (ET50) 225/40 ZR18
Rear 9 X 18 (ET52) 265/35 ZR 18

-OR-

Front 9X18 (ET52) 225/40 ZR18
Rear 10X18 (ET 65) 265/35 ZR 18

BTW, I am sure you know this, but our tool kit has an aluminum guide rod (re: threaded wheel centering stud) that you screw into the hub to make for an easier re-install of the wheels. If you don't have one, you might want to invest in one....I know Performance Products (I think that's the company) has them for something like 20 bucks. You may also want to check what our sponsors might have to offer.

Anyway, maybe some of the more knowledgeable guys out there can help out!

Good luck with your decision!

02-02-2007, 11:54 AM	#2
dcporsche99 Registered User Join Date: Nov 2006 Location: New York Posts: 644	Hi, I recall when I was contemplating new rims and wheels last summer, from what I have read,...I don't recall if it was on this forum or PCA, but after 9.5, spacers are best to put on. This may be especially true if you have lowered your ride. I, too, didn't want spacers, but not for the reason that you described....anyway, I went w/ staggered rims (re: 8 X18 in the front and 9.5 X 18 for the rear). They haven't caused me any grief yet (knock on wood). Intererstingly, the Bentley Service Manual 1997-2004, p. 44-1 states that the approved tire combinations for 18 inch wheels are: Front 7.5 X 18 (ET50) 225/40 ZR18 Rear 9 X 18 (ET52) 265/35 ZR 18 -OR- Front 9X18 (ET52) 225/40 ZR18 Rear 10X18 (ET 65) 265/35 ZR 18 BTW, I am sure you know this, but our tool kit has an aluminum guide rod (re: threaded wheel centering stud) that you screw into the hub to make for an easier re-install of the wheels. If you don't have one, you might want to invest in one....I know Performance Products (I think that's the company) has them for something like 20 bucks. You may also want to check what our sponsors might have to offer. Anyway, maybe some of the more knowledgeable guys out there can help out! Good luck with your decision! Last edited by dcporsche99; 02-04-2007 at 01:06 PM.