View Single Post
Old 11-12-2024, 10:37 AM   #7
elgyqc
Registered User
 
elgyqc's Avatar
 
Join Date: Sep 2018
Location: Laval QC
Posts: 782
Garage
Quote:
Originally Posted by JFP in PA View Post
It actually worked very well; it was based upon the electronic ferrous metal detection system commonly used on a variety of combat aircraft. A small sensor replaced the oil drain plug and had wires that ran up to an alarm module inside the car; when the ferrous metal content of the oil got too high, it set off a warning. . Its biggest shortcoming was the wires as the sensor was exposed to a very vulnerable spot and the wiring took a beating.
Interesting, when I worked at the Pratt and Whitney engine plant near Montreal we installed chip detectors as described by JFP during engine testing. Any metal in the oil completed the circuit between the contacts and caused an alarm.
__________________
Grant
Arctic Silver 2000 Boxster S - bought with a broken engine, back on the road with the engine replaced
Green 2000 Boxster 5-speed and 1978 928 auto
1987 924S 5-speed (Sold) - Blue 2000 Boxster 5 spd (Sold)

Last edited by elgyqc; 11-12-2024 at 10:42 AM.
elgyqc is online now   Reply With Quote