986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post - Replaced Clutch Hydraulics -- Now I don't seem to have full pedal travel

jluetjen · 04-19-2024, 03:10 PM

I just replaced my clutch hydraulics (master cylinder, the 2 hoses to the reservoir, and the slave cylinder), and got everything bled (with the pedal all the way down to the floor). But now I seemed to have lost some pedal travel at the bottom of it's travel (i.e. when my leg would be fully extended). I also can't put the car into gear, so the clutch is certainly not activating.

I'm thinking I'm going to need to bleed the system again.

Any ideas?

04-19-2024, 03:10 PM	#1
jluetjen Registered Member Join Date: Sep 2022 Location: Massachusetts Posts: 16	Replaced Clutch Hydraulics -- Now I don't seem to have full pedal travel I just replaced my clutch hydraulics (master cylinder, the 2 hoses to the reservoir, and the slave cylinder), and got everything bled (with the pedal all the way down to the floor). But now I seemed to have lost some pedal travel at the bottom of it's travel (i.e. when my leg would be fully extended). I also can't put the car into gear, so the clutch is certainly not activating. I'm thinking I'm going to need to bleed the system again. Any ideas? Last edited by jluetjen; 04-19-2024 at 03:49 PM.