Quote:
Originally Posted by elgyqc
The pistons did not seize... they all slid out normally when I separated the cases
The pistons seem to be OK, I'll have to do a closer inspection. I'll have a look at your links.
|
My guess is you have thrust wear. The motion of the pistons going up and down have a component of pushing against the wall. Partly due to geometry of the rods/wrist pins and probably gravity as well.
It's been awhile, but I did send off some blocks to have them nikisiled and then honed by Millenium Technologies
__________________
Drivers: '15 Panamera Hybrid (wife's), ' 01 996 GT2, 00 Boxster S, '96 993 Çab/Tip (wife's)
Race Cars: '75 911 RSR Replica & '99 Spec Boxster
mike@lonestarrpm.com
|