|
Update to add info:
I just used the drive cycle process to get my 5 speed, 2.5 litre, 98 Boxster ODBC ready. A few weeks ago it tossed a code I related to the SAI. I cleared the code and had drive quite a bit but was still sitting with a not ready for the E and C lights.
From a Cold start I Warmed it up the garage following Part A. Then ‘accidentally on purpose’ shut the engine off. I was running with my code reader attached.
Backed it out and ran Part B. At the end of Part B I stopped at a stop sign.
I then proceeded to follow Part C. After about 5 minutes I got a red light. I accelerated after the light and just touched 4000 rpm. A few minutes later the E light went to the ready state. I came to another light and was able to make a right on the green light and continue my pace. A few minutes later the C light reached the ready state. I went home. Unplugged the Code Reader. Took it the Inspection Station and got it done.
__________________
"YouTube Certified in Various Specialties"
|