Quote:
Originally Posted by PLexo50
Hello there, putting up my recently acquired 986 S for sale. I originally purchased this to build as an HPDE car however I've decided to change directions. The car runs and drives great however does need some work in order to be perfect. Please feel free to make an offer by DMing me.
-132k miles
-Clean PA title in hand
-No rust at all
-A/C and Heater work well
-Stored indoors on a battery maintainer
-PO stated clutch and IMS bearing were performed two years ago with the kit offered from Pelican at the time.
Needs;
-Oil seep from passenger scavenge pump (new seal included)
-Needs both outer CV boots replaced(included)
-Serpentine belt needs replacement(included)
-Could benefit from an AOS replacement(included)
-Shifter is stiff in neutral position however gets into all gears without issue
|
What size engine?
__________________
My Beast 2004 Boxster SE #0174
- 3.8 with all the internal goodies, Under-mount Pulley, IPD Plenum, 996 Intake, Softronic Tune, 987 Factory Sport Exhaust, skid plates, IMS solution, Ohlins R&T, RSS Toe Links, Camber Plates, Michelin Pilot Super Sport on all 4 corners, Alpine Double Din c/w new speakers & amps.
|