Quote:
Originally Posted by elgyqc
Thanks.
And for the center nut? Pelicans says 24 ft/lb (but it is not clear to me if that is for the original flange and center bolt or for the LN kit which has a stronger center bolt), elsewhere I saw 12 nm. Provisionally I torqued to about 15 ft/lb which seems about right as long as the original bolt is not too fragile.
|
IMS Solution manual says.
Quote:
Center IMS flange nut torque must be at least 12 ft/ lb,but not to exceed 20 ft/lb
|
__________________
2003 Boxster S
| 987 Air Box | K&N Air Filter | 76mm Intake Pipe| 996 76mm TB | 997 Distribution T | Secondary Cat Delete Pipes | Borla Muffler | NHP 200 Cell Exhaust Headers |
|