986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post

P_Carfahrer · 09-12-2018, 11:24 PM

I have been looking at GT3 style LCAs for some time and have wanted to model some up but have not had a part to look at until recently. Attached pictures are modeled using a stock GT3 inner and outer but with 14mm spherical bearings (monoballs) at both ends and Tarett style solid thrust bushings. I will build sets for both front and rear out of 7075 for the inner and outer arms and thrust bushings and 4340 for the monoball spacers.
Ideas, comments, corrections from the wealth of knowledge of the board would be great.
I look to do this over the next months for this winter’s project and will document the design, build, and install with you all.

09-12-2018, 11:24 PM	#1
P_Carfahrer Pathological Tinkerer Join Date: Mar 2017 Location: Utah Posts: 197	GT3 LCA Build I have been looking at GT3 style LCAs for some time and have wanted to model some up but have not had a part to look at until recently. Attached pictures are modeled using a stock GT3 inner and outer but with 14mm spherical bearings (monoballs) at both ends and Tarett style solid thrust bushings. I will build sets for both front and rear out of 7075 for the inner and outer arms and thrust bushings and 4340 for the monoball spacers. Ideas, comments, corrections from the wealth of knowledge of the board would be great. I look to do this over the next months for this winter’s project and will document the design, build, and install with you all.