Quote:
Originally Posted by jpc763
I don't know why I procrastinated this so long but finally installed it today. Awesome!
Of note, I wired to the un-switched power on the cigarette lighter. There is a small led on the board that is always lit. Any concern?
Also, it seems my buttons are reversed. I push the side with the roof to open and the side with the convertible to close. Which pins are reversed?
|
I am currently debugging. I removed the system to try and get the button switched (The open button closes the top and the close button opens it). Since pulling it out, I have not been able to close it at all.
I assume that close is pins 3 and 9 on the Arduino. They do not correspond to matching pins between the switch and harness. What am I missing?