[Oldcarguy]

Originally Posted by Oldcarguy

I’ve experimented extensively with a set of these. Removed the adhesive, shaved them as thin as possible etc. They still don’t set flush and look tacked on. I abandoned the project.

IHMO, the pic the OP posted has the actual lenses painted rather than covers over the top of the lenses (along with some body filler/work to hide the seams). That’s the only way I see to get that flush fit. You lose the turn signals and fogs. Particle Wave’s pic is the reality using the covers.

Here’s a shot of my best test fitting after painting. Not great (and this is the most flattering angle).




Sent from my iPad using Tapatalk