986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post - Roll Bar Fabrication. Advice on Mock-up Needed

truegearhead · 04-18-2017, 06:35 PM

I'm having a bar fabbed up for HPDEs, its tacked together now and I'm heading to the shop tomorrow to take a look. Does anyone see any changes that need to made? The seat is pushed all the way back currently, 4-5"s back from where I sit so I'm not to worried about the bar being close to my head in these photos. The other thing I'll note is that I'm going to reinstall the top so the down bars are a little steep to accommodate it. Currently the hoop sits even with the wind shield.

04-18-2017, 06:35 PM	#1
truegearhead Registered User Join Date: Jul 2011 Location: Richmond, VA (The Fan) Posts: 978	Roll Bar Fabrication. Advice on Mock-up Needed I'm having a bar fabbed up for HPDEs, its tacked together now and I'm heading to the shop tomorrow to take a look. Does anyone see any changes that need to made? The seat is pushed all the way back currently, 4-5"s back from where I sit so I'm not to worried about the bar being close to my head in these photos. The other thing I'll note is that I'm going to reinstall the top so the down bars are a little steep to accommodate it. Currently the hoop sits even with the wind shield. __________________ 1997 Boxster 4.2L Audi V8 Bi-Turbo 2003 911 C2 NASA HPDE Instructor Last edited by truegearhead; 04-18-2017 at 06:40 PM.