View Single Post
Old 03-26-2017, 09:10 AM   #9
Gilles
Registered User
 
Join Date: Dec 2009
Location: Orange County, CA
Posts: 1,904
Quote:
Originally Posted by JFP in PA View Post
2003 and new Boxsters do not have removable plug tubes, they metal and cast into the cam covers.
Yes, you have three green seals that sit between the head and the inside of the cam cover:


Also, as a precaution I decided to replace the o-rings on both cam actuators and used the sealant sold by Pelican for the cam cover, and so far (after +/- 1,000K) have not got any more leaks :-)

However, I lowered the engine a few inches for the cam cover to clear the frame.

I can search the P/N's for the seals I replaced if you need them.

Good luck!

PS: the two other holes on the left side are where the variocam actuators go

Last edited by Gilles; 03-26-2017 at 10:50 AM.
Gilles is offline   Reply With Quote