986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post - Custom Center Caps for Porsche Wheel [from CAD, prototyping to finish]

Nine8Six · 01-22-2017, 04:01 AM

Decided to become a VJ for one day loll

Did this vid to show the ‘behind the scene’ of CAE and how design (or feature) changes are validated. In this video we’ll be lowering the height of the clip and wall by -0.5mm. We’ll then clone the solution and see how stresses compare to the design changes.

When I say ‘nasty job (but fun)’ I really meant that. It can take quite a bit of time to come up with a proven concept – weeks sometime.

Next: I'll be showing how to balance a part assembly using Multiphysics Simulation tools and sensors. Think some of you will love that episode. I'll try to vid those over youtube for you guys to see.

01-22-2017, 04:01 AM	#24
Nine8Six Registered User Join Date: Sep 2013 Location: Montreal, QC. (currently expat to Shanghai) Posts: 3,249	CAE and upcoming Multiphysics Simulation Decided to become a VJ for one day loll Did this vid to show the ‘behind the scene’ of CAE and how design (or feature) changes are validated. In this video we’ll be lowering the height of the clip and wall by -0.5mm. We’ll then clone the solution and see how stresses compare to the design changes. When I say ‘nasty job (but fun)’ I really meant that. It can take quite a bit of time to come up with a proven concept – weeks sometime. Next: I'll be showing how to balance a part assembly using Multiphysics Simulation tools and sensors. Think some of you will love that episode. I'll try to vid those over youtube for you guys to see. __________________ ______________________________ '97 Boxster base model 2.5L, Guards Red/Tan leather, with a new but old Alpine am/fm radio.