Quote:
Originally Posted by Smallblock454
Hello Ton,
yes this is the mount for the front engine mount. But these 4 are bolts and screws. So if you're lucky the bolts come out with the screws.
Don't forget to support the engine while doing this. You an do this from the top or from the bottom. But if you want to remove the complete intake system i would recommend to support from the bottom.
Regards, Markus
|
Translation
Studs and nuts
FIFY
No big deal if the studs come out, just put them back in with a 7mm socket
__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"
|