View Single Post
Old 05-23-2006, 04:00 PM   #13
Perfectlap
Registered User
 
Perfectlap's Avatar
 
Join Date: Nov 2004
Location: New Jersey
Posts: 8,709
well the soft top cover is amust have for you blazing sun folks
I would attach this only from the front and rear, cut the doorhandle loops off with a scissors. Not good to be rubbing on the paint that often.
http://cgi.ebay.com/ebaymotors/1997-06-PORSCHE-BOXSTER-CAR-COCKPIT-COVER-ALL-WEATHER_W0QQcmdZViewItemQQcategoryZ50456QQitemZ806 7851262QQrdZ1QQsspagenameZWDVW
this guy should give me a commission!


Quote:
Originally Posted by Wintermute
So you are saying that the swirl remover should be applied by hand? I thought a polisher was the prefered way of doing swirl removal?.
As for the swirl remover what I meant to say is that there are only so many times you can go the PC route to remove swirls. Probably why its best to start off with as mild a swirl remover that will do the job. If you still see swirling kick up to the next most abbrasive formula. This way you aren't needlessly cutting away clear coat.
Swirl removal by hand won't save you any clear coat and just give you carpel tunnel syndrome.
__________________
GT3 Recaro Seats - Boxster Red
GT3 Aero / Carrera 18" 5 spoke / Potenza RE-11
Fabspeed Headers & Noise Maker
BORN: March 2000 - FINLAND
IMS#1 REPLACED: April 2010 - NEW JERSEY -- LNE DUAL ROW

Last edited by Perfectlap; 05-23-2006 at 04:03 PM.
Perfectlap is offline   Reply With Quote