[san rensho]

Originally Posted by JFP in PA

1. Go to Lowes and get two overly long bolts of the same size as two of the outside bell housing bolts, but about twice as long. Cut the heads off to make "guides" to assist during reinstallation.
2. Look up a company called Kingsborne Wire Works; for $10 they will sell you the same clutch disc alignment tool Porsche sells for about $50.
3. Either locate the proper RMS installation tool (sells for about $600, so try to borrow or rent one), or make your own out of some PVC pipe and other bits.

Thanks

So the plastic alignment tool that comes with the clutch pack is no good?