986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post - Porsche Wind Deflector with Edge Lighting [from CAD, prototyping to finish]

amitmishra4 · 06-30-2015, 05:12 AM

The wife and kid are at the in laws for a couple days so daddy got to play with his toys for a little.

Installed new LED side markers and the wind breaker finally,wired it to the ash tray light:

I should add, the entire install including wiring took no more than 30 mins, probably less actually, I even drilled a channel in the trim to route the wire through. The only thing I had some trouble with was taking the existing piece off without snapping the latches, I was pulling upwards instead of back of course.

Thanks Fred!

06-30-2015, 05:12 AM	#582
amitmishra4 Registered User Join Date: Jun 2014 Location: New Jersey Posts: 230	The wife and kid are at the in laws for a couple days so daddy got to play with his toys for a little. Installed new LED side markers and the wind breaker finally,wired it to the ash tray light: I should add, the entire install including wiring took no more than 30 mins, probably less actually, I even drilled a channel in the trim to route the wire through. The only thing I had some trouble with was taking the existing piece off without snapping the latches, I was pulling upwards instead of back of course. Thanks Fred! __________________ 2001 Seal Gray Boxster (Hair Salon on wheels) 2013 Audi Q5 (Family Mover) 2006 Yamaha R1 (Adrenaline Machine) Last edited by amitmishra4; 06-30-2015 at 05:17 AM.