View Single Post
Old 04-01-2015, 10:26 PM   #7
Jake Raby
Engine Surgeon
 
Join Date: Aug 2008
Location: Cleveland GA USA
Posts: 2,425
So, you got banned from Rennlist for your behavior, and now you are here trying to start a mess?

A blind man can see straight through your motive with this post. In your video link it would help if you'd offer some narration, otherwise it appears that you are a mime, right down to the gloves.

When your technology (actually its not yours) is applied near 25,000 times, and people all over have installed them, you might graduate to a level high enough where a component fails.

Under my roof we have completed 400 IMS Retrofit procedures, dating all the way back to a time prior to 2007. Out of those we have not experienced a single failure of any IMS Retrofit product. Why? Because of the regimen that I developed and the post- process support and instruction that we provide to the vehicle owners. Qualifying the engine prior to the IMSR is just one part of the process, the job is not done when the car is finished; we must ensure the owner uses premium quality engine oil, and services the engine every 5K miles or 6 months.

That said, say what you want, the Lion isn't concerned with the opinion of the Lamb. No one will know the variables behind that failure, but what I want to know is why are you posting it, and why isn't the owner concerned enough to report this through the proper channels? Everyone reading this knows why.
__________________
Jake Raby/www.flat6innovations.com
IMS Solution/ Faultless Tool Inventor
US Patent 8,992,089 &
US Patent 9,416,697
Developer of The IMS Retrofit Procedure- M96/ M97 Specialist

Last edited by Jake Raby; 04-01-2015 at 10:31 PM.
Jake Raby is offline