[jpc763]

Originally Posted by KevinH1990

Check out this thread: http://986forum.com/forums/general-discussions/51283-does-anyone-know-vss-wire-02-bose.html

Scroll down to post 13 and you will see picture of the unit with the wire harness connected.

that picture will be helpful. I will try to blow it up when I work on the harness. Looking at the picture I am still not sure how to connect the blue wire.

Originally Posted by KevinH1990

I used this for a reference on the wiring:

http://www.renntech.org/forums/topic/19616-porsche-boxster-avic-d3-installation-instructions/

You will need to make a donation to Renntech to access this file, but it is worth it.

I have that Renntech article printed out. I did not see any reference to wiring, just prepping the dash for the install.

Originally Posted by KevinH1990

This may also help.

Pelican Technical Article: Changing Your Boxster Stereo Head Unit / Installing Boxster Ipod Integration - 986 / 987

It has been a while since I did this project, but if I recall correctly, the blue wire with the white stripe on the red connector sends the signal to power on the amplifier and the antenna.

This article should be helpful.

Lets see what tomorrow brings.

Thanks for your help.