|
Point
The learning point for me here was......I should have installed the gauges and cruise control BEFORE I put the 3.4 996 motor in the car and before I had the 986 DME flashed with a 996 ROW flash.!!!!!!!!!!!!!!!!!!!!!!!!!!
I have been told and I now believe my problem exists because…my new cluster is still recognized as a 986 while my DME is recognized as a 996.
So when Porsche did a control unit scan as a 986 model with the Porsche tester it failed as the DME did not recognize it as a 986. If the DME is scanned as a 996 the cluster will also fail because it is not recognized as a 996.
I.E. am doing what I posted below.
Anyone see anything incorrect with this logic please let me know.
Thanks to all, Reebuck1
|