[KRAM36]

Originally Posted by Dave S.

Not sure if this is the correct size or not, but it looks like it would work. You need to be sure to get a slotted one, so you can slip it over the cable:

http://www.amazon.com/Pyramid-Mountain-Lever-Adjusting-Barrel/dp/B000O5SR4W/ref=pd_sim_sbs_sg_1?ie=UTF8&refRID=0B8CMN1NZESGVW7VVS13

Success using this piece on my 03 Boxster, but I could have used a bit more thread length. This part gave me just enough window movement for the window to clear.

Originally Posted by Dave S.

Not too bad. I followed these instructions:

Boxster Projects | Power Window Motor Repair

Following this guide I did not know what he was talking about when he says removed the C-shaped piece of plastic. This piece is what he is talking about.