986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post - Front hood release cable broken. Is this a pain to R&R. Any tips?

Krieger · 01-10-2015, 12:16 PM

Fortunately I have the emergency pull routed through the tow eye in the bumper, so I have been using that. The cable broke right were it wraps around the pull handle. I bought a new cable/housing. I've traced the cable routing from the the front latch through the left front fender, under the brake reservoir. It then goes into the passenger compartment and disappears...

*I figured this out and I am turning this into a how to thread. I will be adding pics from cell phone and adding (editing) text later.

01-10-2015, 12:16 PM	#1
Krieger Registered User Join Date: Nov 2014 Location: Santa Rosa, CA Posts: 66	Front hood release cable broken. Is this a pain to R&R. Any tips? Fortunately I have the emergency pull routed through the tow eye in the bumper, so I have been using that. The cable broke right were it wraps around the pull handle. I bought a new cable/housing. I've traced the cable routing from the the front latch through the left front fender, under the brake reservoir. It then goes into the passenger compartment and disappears... I figured this out and I am turning this into a how to thread. I will be adding pics from cell phone and adding (editing) text later. Last edited by Krieger; 01-14-2015 at 06:56 PM. Reason: Updating thread to a how to proceedure*