|
Did some more testing this morning
When I meter the output pins (D2 & D3) I do get ~2.5v when I close the switch. The problem is it does not stay latched, in other words it is high only while I close the switch. It doesnort matter how long I keep teh switch closed, as short as momentary or longer. the same result.
Now that is on a meter and one of the problem was that the top relay chattered and the top "stepped" as it was moving.
I am wondering if my board is bad, or the other case is an error in the code
__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"
|