Quote:
Originally Posted by Pdwight
Take a meter and see if the transistors switch ....
|
Quote:
Originally Posted by Shehadehd
I just wanted to make sure that the Base voltage was okay to put the transistor into a saturated state and that the resistor wasn't too small and causing the output pins on the board to overdrive or not providing enough base current for the collector current needed.
|
you guys are great and thanks for your help
I'm gonna breadboard it this week and see if it is switching correctly
I'll post an update once I have a chance to test it
I put everything back to stock for now and at least the top still works correctly
At least I now have a switched 12v line in the upper console. I connected it from the unused phone connector in the bottom of the console
thanks again