|
All the chain parts have been found and removed. At this point the bottom end is all together and all that I have left is just putting the heads on. Went through and lapped in all the valves while I had the heads off. We are having a cold blast here in OK so I am trying to figure out about those tools so if I have to get some I can while its so cold and then when it warms up I can get this engine back together and in the car. Some say that you have to have the tools some don't. I have always build ford engines, and there is so much support for them if you have a question you can find 500 people to tell you how to do it. With this engine your lucky to find 5.
|