|
Pedros Techno DOF IMS fix?
I have an 06 Boxster S and seriously considering getting this kit and having my porsche
shop install it,i have about 60k now and no problems yet atleast that i am aware off.
My only concern is with fairly new technology sometimes there are issues that arise down the road that without tons off miles ect may occur.I have a concern that i would like som feed back on.If there is about 60 psi off pressurized oil shooting into the bearings one side(with seal removed) is there any chance that the other inside seal could be forced out or particially out enough by oil pressure,if that was even possible that would be the kiss of death as that oil would burn up in the shaft tube,become acid ect and cause the bearings to pit and blow even faster.Any thoughts on this. Also for those that have done it,what should i expect in terms off cost for the procedure of install.Thx
|