View Single Post
Old 08-28-2013, 02:05 PM   #5
Perfectlap
Registered User
 
Perfectlap's Avatar
 
Join Date: Nov 2004
Location: New Jersey
Posts: 8,709
Quote:
Originally Posted by southernstar View Post
But if failure does not occur within 10 years of delivery in a certain car, there would be a very strong argument for Porsche that the IMS bearing in that car was not fundamentally flawed.

Brad

This logic reminds me of the reliability rankings that put Porsches near the top -- except for the Cayenne. Why? Because that's the only car that seems to be be driven daily. Similarly, the age of the car is not really a good barometer for bad design. As we see the prices of these cars falling fast, the new owners will start ramping up the mileage at a rate not seen in the first 10 years.

I predict many Boxster/Carrera owners who will not endure the expense of a bumped up clutch/ims/rms job because the added costs don't fit within their budgets, will see a markedly different rate of IMS failures than those who owned during the first 10 years -- cars sold well before they reached 100K miles. I also suspect very strongly, that 2005-2008 cars that have their clutches replaced without ever addressing the IMS, even if you remove one of the seals to allow for splash lubrication, will also see significantly higher failure rates than those owners saw in the their first 10 years of ownership.

Point is as mileage goes higher, the flawe in this design will become obvious, particularly how there was/is no "plan B" for out-of-warranty 2005-2008 cars that require the extremely expensive hassle of splitting open the engine. Porsche knows full well that a sealed bearing will not last indefinitely.
__________________
GT3 Recaro Seats - Boxster Red
GT3 Aero / Carrera 18" 5 spoke / Potenza RE-11
Fabspeed Headers & Noise Maker
BORN: March 2000 - FINLAND
IMS#1 REPLACED: April 2010 - NEW JERSEY -- LNE DUAL ROW

Last edited by Perfectlap; 08-28-2013 at 02:09 PM.
Perfectlap is offline   Reply With Quote