View Single Post
Old 04-10-2013, 05:11 PM   #5
Wingnut2u
Registered User
 
Wingnut2u's Avatar
 
Join Date: Mar 2008
Location: Dallas, TX
Posts: 288
I'm currently running an 18x10.5 et52 in the rear with 275/35/18 with PSS9s and I can tell you that there is no more than a credit cards width of space between the wheel and the strut and I had to roll the rear fenders since my car is lowered somewhere between .75-1 inch. Front I have 18x8 with 225/40/18 which fit well. I have run 245's up front on 8.5 rims but I cannot see a reason nor am I sure it is possible to run 255s up front.

If you want to make sure things will fit without the hassle and trouble shooting I would go with a 19x8 with 235/35/19 and 19x10 with 275/30/19 tires.

My son hopped a curb and destroyed two of my wheels so I am currently looking at a new set up and I think this is the route I am going to take as well. Most likely I will be getting the 808's from Wheel Dynamics.
__________________
2001 Boxster S
RUF front bumper, Techart side skirts, Gemballa rear bumper, PSS9s, Cargraphic 18" racing wheels, RUF exhaust, GT3 seats

Last edited by Wingnut2u; 04-10-2013 at 05:15 PM.
Wingnut2u is offline   Reply With Quote