View Single Post
Old 12-13-2012, 03:22 PM   #1
san rensho
Registered User
 
Join Date: May 2011
Location: Miami florida
Posts: 1,591
New MAF questions

So I got the $93 Buyautoparts MAFand the Durametric numbers are great. The FRA and RKAT numbers and voltage are all right on the money,where with the old MAF the numbers were pretty far off. But the mass air flow still is off.The spec is 15 kg/h +/- 1.25, the old MAF read around 13 and the new reads about 19. I also got two error codes, MAF reading above upper limit and air intake temp reading above upper limit right after I installed the MAF but they haven't come back since driving around a bit.

Now it has a slight drivability problem. The idle is hunting, almost stalling when I first start the car but it gets better as it warms up. And the power felt down a little but it did seem to improve after a couple of full throttle runs.

So is this just the DME adapting to the new MAF or something else?
__________________
Current car

2000 Boxster 2.7l red/black

Previous cars

1973 Opel Manta
1969(?) Fiat 850 Convertible
1979 Lancia Beta Coupe
1981 Alfa Romeo GTV 6
1985 Alfa Romeo Graduate
1985 Porsche 944
1989 Porsche 944
1981 Triumph TR7
1989 (?) Alfa Romeo Milano
1993 Saab 9000

Last edited by san rensho; 12-13-2012 at 03:24 PM.
san rensho is offline   Reply With Quote