|
Finished the job today. Easy Peasy.
If you've ever changed brake lines on a 914, you'll know the "tool", but it's one I made by bending over the tip of a flat-head screwdriver. Tool did the treat for this job as well. They "popped" right out with no trouble at all. Some automotive grease on the new ones and some "heavy" leaning on them with a broom handle, they slipped right in with ease.
Degreased and cleaned the engine really well, buttoned it all back up and ran it for about 10 minutes, then took it for a spirited run. Came back clean as a whistle.
Calling this one a success!
|