[tony_fury]

Originally Posted by tanque55

Just wondering what the correct procedure for getting the new pads and rotors to set correctly, if there is one. Doing the job tomorrow.

Here's the procedure I used..

1. After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
2. Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.
3. DO NOT DRAG BRAKES!
4. Allow 15 minutes for brake system to cool down.
5. After step 4 your new pads are ready for use.