|
My 2 cents says its fake. I can see the machining marks on the vanes and there is no ridge next to the hub where the pads don't touch. I used to be a tool and pattern maker, so I know what machining marks look like. If it were real, the pads would be grated off in a couple off brake applications if the pistons didn't pop out of the calipers first. There would be pad material everywhere. Someone with a brake lathe is having a good time posting this for a laugh.
__________________
2000S Ocean Blue Metallic- 116K
3X Water Pump, Clear side markers, Crios Mod, Front engine mount, Flywheel, clutch, RMS, AOS, MAF, serpentine belt, power brake vacuum line, battery, 2X CV boots, Fuel filter, Oil filler tube, 3X ignition switch, 90K service, gas cap
Last edited by Spinnaker; 09-16-2012 at 09:38 PM.
|