OK so here's the deal. 2000 boxster 87K miles. Engine replaced by Porsche at 40K due to "internal engine failure". I have had the car 3 weeks and just did my first oil change. According to the previous owner it had been over 10k since the last change. I inspected the filter element by tapping it over a white paper towel and found nothing except some medium brown flakes of what appear to be solidified oil residue or something from the filter itself and a very few small black plastic particles. However, after swirling my magnet in the bottom of the filter canister before dumping it out if found very small metal particles. I hope I can get the pictures to upload so you can see them. What do you think so far? These are NOT the metal particles. Nothing on the paper towel was metal particles.