986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post - Pelican IMS bearing stud has separated inside shaft

philou320 · 08-08-2012, 10:45 PM

Looking at the picture, I would try this:
With a flat screw driver, try to make it rotate, hitting it from the side very slowly on the upper part where the metal is thick.

Stop if you see that it is not moving,

08-08-2012, 10:45 PM	#17
philou320 Registered User Join Date: Nov 2010 Location: France Posts: 32	Looking at the picture, I would try this: With a flat screw driver, try to make it rotate, hitting it from the side very slowly on the upper part where the metal is thick. Stop if you see that it is not moving,