|
ME7.2 - Boot Mode
Is there anyone who can point me in the right direction to be able to get the ME7.2 DME into Boot mode, so that I can dump the contents of it's EEPROM to a binary?
I found a photo on the Internet which seems to show that you should connect pin 104 of one of the 2 main Infineon chips, which is rather different from the statement made by my Galletto software, that I need to put Pin 24 to ground (Which I assume is pin 24 on the EEPROM.
I have taken a photo to show what I think they refer to, but is there anyone with knowledge of putting an ME7.2 into Boot mode, who can clarify the correct proceedure?
Sorry for the HUGE picture but it is the only way to show it clearly. :-)
http://www.cyberfooks.com/Porsche/Porsche-ME7.2-Bench-Flash-Pinouts.JPG
__________________
2001 Boxster S - 997 GT3 bodykit, Techart Wheels, Air Suspension, 2DIN stereo-GPS-Bluetooth-Reverse numberplate camera, rear speakers, Park assist, PSM, Litronic, Porsche Crests in the headrests, Rebuilt engine-IMS upgrade,Eurocup Boxster matched tube manifolds-twin high-flow cats- twin high flow rear silencers, Short-shift kit.
1999 Boxster - Xenon dip, Main and fog, Park assist, stereo-GPS-Bluetooth, rear speakers, sub-woofer
|