I found that doing the switch from underneath was too dificult for me. This post in the DIY section worked easier for me. Go to the #15 post in this thread. A few more screws to remove, but it was a lot easier. You need to have a short handle T-15 driver for the screws on the side of the dash. There isn't enough clearance in the door jam for a regular length one.
Ignition switch problems, need advice/ help
__________________
2000S Ocean Blue Metallic- 116K
3X Water Pump, Clear side markers, Crios Mod, Front engine mount, Flywheel, clutch, RMS, AOS, MAF, serpentine belt, power brake vacuum line, battery, 2X CV boots, Fuel filter, Oil filler tube, 3X ignition switch, 90K service, gas cap, Coolant tank
|