View Single Post
Old 08-03-2011, 03:59 PM   #11
Earn
Registered User
 
Join Date: Jun 2011
Location: ATL
Posts: 112
Quote:
Originally Posted by Byron in Atlanta
ok...got home and hooked up the obd tester.....still no codes, or pending codes. Checked emissions and these are the two items out of eight that show " inc" (inconclusive?) cat monitor & evap system. Also checked the report from the emissions place. Just says "Readiness = Fail" , KOEO = PASS, DLC = PASS , MIL CMD = PASS
This was my exact issue. I kept being told the last two "emission sensors" hadnt reset when checked with an obd reader and also the emission computer. I tried three or four times with the same result. I drove a couple weeks then decide to try again. The morning I planned on going again the cel came one. Pulled the codes and they were both banks codes ending 28 and 30 if I remember correctly. I had a bad seal that was replaced that was thought to be the problem the first time I had a cel and emission issue. Now I need a maf. Its been a real pain.
Earn is offline   Reply With Quote