View Single Post
Old 06-02-2011, 06:09 PM   #6
Jager
Registered User
 
Jager's Avatar
 
Join Date: Jul 2010
Location: California
Posts: 1,859
Garage
You can do it yourself but you will need a Torx T 20 anti-tamper bit/driver to remove the sensor. You will also have to get to the top of the motor by opening the convertible top half way, remove the carpet, then remove the motor cover. See photo below on what one of the Torx anti-tamper bits looks like.
Attached Images
 
Jager is offline   Reply With Quote