View Single Post
Old 04-16-2011, 02:02 PM   #3
yoyo7
Registered User
 
yoyo7's Avatar
 
Join Date: Apr 2009
Location: Toronto, Canada
Posts: 40
I caved...

Knowing the risk of what could happen "if" and the cost for replacing the engine was no longer a "wait and see" decision. So i bit the bullet this week and had the IMS upgraded with LNE solution kit, replaced the RMS seal and what the heck i decided to replace the clutch and flywheel assembly. The OEM bearing was still in very good condition with no sign of wear and tear. The RMS was leaking slightly. The clutch had roughly 30% life remaining.

So I can now sleep at night for another 60K miles!

Happy Motoring.
__________________
2004 Boxster S with 29K Miles,- H&R performance springs
- Fabspeed sport exhaust with secondary cat by-pass
- B&M Short shifter, EVO VFlow cold air intake
- 19x8.5 front PS2 235/35/19, 19x10.5 rear PS2 275/30/19
- Kenwood HD6990 Navi, Voce speakers, 8" sub and Hertz amp
yoyo7 is offline   Reply With Quote