986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post

Jinster · 11-10-2010, 01:04 PM

I would have thought if you open the DLM, you just re-solder all the points you see. That wire plug pulls on the socket on the DLM when the wires start to dangle. So there would be stress on all the solder joints in there. Shouldn't take more than a few minutes to just re-solder them all for good measure.

I am planning to do something similar this weekend.

11-10-2010, 01:04 PM	#5
Jinster Registered User Join Date: Apr 2004 Posts: 86	I would have thought if you open the DLM, you just re-solder all the points you see. That wire plug pulls on the socket on the DLM when the wires start to dangle. So there would be stress on all the solder joints in there. Shouldn't take more than a few minutes to just re-solder them all for good measure. I am planning to do something similar this weekend. __________________ --1989 Mazda MX6 GT --1997 Porsche Boxster --2005 Lexus RX330 --2007 Maserati Quattroporte Sport GT